技術(shù)規(guī)格
Maximum HDBaseT® Cable Lengths
Cable Type:
Resolution: DM-CBL-ULTRA
DigitalMedia™ Ultra Cable DM-CBL-8G
DigitalMedia 8G™ Cable CAT5e (or better)
UTP or STP [1]
1080p60 Full HD 330 ft (100 m) 330 ft (100 m) 330 ft (100 m)
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 2K DCI
2560x1440 WQHD 230 ft (70 m) 165 ft (50 m)
2560x1600 WQXGA
3840x2160 Ultra HD
4096x2160 4K DCI
Video
Input Signal Types HDMI® w/Deep Color, 3D, & 4K (DVI & DisplayPort Multimode compatible [2])
Output Signal Types HDMI w/Deep Color, 3D, & 4K (DVI compatible [2])
Maximum Resolutions
Scan Type Resolution Frame Rate Color Sampling Color Depth
Progressive 4096x2160 4K DCI
&
3840x2160 Ultra HD 24 Hz 4:4:4 30 bit
30 Hz 4:4:4 24 bit
30 Hz 4:2:2 36 bit
60 Hz 4:2:0 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
Audio
Input Signal Types HDMI (DisplayPort Multimode compatible [2])
Output Signal Types HDMI
Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
Communications
RS-232 Extends 2-way serial device control signals up to 115.2k baud
IR Extends 1-way IR device control signals up to 455 kHz
HDMI Passes HDCP 2.2, EDID, & CEC
Connectors – HD-TX3-C Transmitter
HDMI IN (1) 19-pin Type A HDMI female;
HDMI digital video/audio input;
Also supports DVI or Displayport Multimode [2]
IR IN (1) 2-pin 3.5mm detachable terminal block;
IR repeater input port;
IR signal input up to 455 kHz
COM (1) 3-pin 3.5mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, software handshaking support
24VDC 0.75A (rear) (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input (PW-2407WU power pack included) [3]
Ground (rear) (1) Flying lead, chassis ground connection
HDBaseT OUT (rear) (1) 8-pin RJ45 female, shielded;
Connects to the HDBaseT IN port of the HD-RX3-C receiver via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1]
Connectors – HD-RX3-C Receiver
IR OUT (1) 2-pin 3.5mm detachable terminal block;
IR repeater output port;
IR output up to 455 kHz
COM (1) 3-pin 3.5mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, software handshaking support
G (1) 6-32 screw, chassis ground lug
HDMI OUT (1) 19-pin Type A HDMI female;
HDMI digital video/audio output;
Also supports DVI[2]
HDBaseT IN (1) 8-pin RJ45 female, shielded;
Connects to the HDBaseT OUT port of the HD-TX3-C transmitter via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1]
PWR 24VDC 0.75A (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input (PW-2407WU power pack included) [3]
Controls & Indicators – HD-TX3-C Transmitter
PWR/LINK (1) dual-color amber/green LED, indicates operating power supplied via local power pack or HD-RX3-C[3], and indicates HDBaseT link status and HDMI input signal presence
HDBaseT OUT (rear) (2) LEDs, green LED indicates link status, amber LED indicates video and HDCP signal presence
SW1 (side) (1) slide switch, enables hot plug detect
Indicators – HD-RX3-C Receiver
PWR (1) green LED, indicates operating power supplied via local power pack or HD-TX3-C [3]
HDBaseT IN (2) LEDs, green LED indicates link status, amber LED indicates video and HDCP signal presence
Power Requirements
Power Pack 0.75 Amp @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU, included [3]
Environmental
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation HD-TX3-C: 2 BTU/hr;
HD-RX3-C: 11 BTU/hr
Enclosure – HD-TX3-C Transmitter
Construction Metal, black finish with white or black polycarbonate label overlay
Flush Wall Mount 1-gang mountable in an extra-deep electrical box (2-1/2 inch deep minimum), requires decorator style faceplate (not included)
Surface Mount Surface mount bracket included
Rack Mount Attachable to a single 19-inch EIA rack rail
Enclosure – HD-RX3-C Receiver
Construction Aluminum w/polycarbonate label overlay and (4) integral mounting flanges
Mounting Freestanding, surface mount, or attach to a single rack rail
Dimensions
HD-TX3-C Transmitter Height: 4.12 in (105 mm);
Width: 1.72 in (44 mm);
Depth: 2.35 in (60 mm)
HD-RX3-C Receiver Height: 1.43 in (37 mm);
Width: 3.91 in (100 mm);
Depth: 4.70 in (120 mm)
Weight
HD-TX3-C Transmitter 5.8 oz (165 g)
HD-RX3-C Receiver 11.6 oz (330 g)