技術(shù)規(guī)格
Maximum Cable Lengths
Cable Type:
Resolution: DM-CBL-ULTRA
DigitalMedia™ Ultra Cable DM-CBL-8G
DigitalMedia 8G™ Cable CAT5e (or better)
UTP or STP [1]
1080p60 Full HD 330 ft (100 m) 330 ft (100 m) 330 ft (100 m)
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 2K DCI
2560x1440 WQHD 230 ft (70 m) 165 ft (50 m)
2560x1600 WQXGA
3840x2160 Ultra HD
4096x2160 4K DCI
Video
Scaler 4K video scaler, motion-adaptive deinterlacer, intelligent frame rate conversion, Deep Color support, content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), video wall processing up to 8 wide x up to 8 high [8]
Input Signal Types DM 8G+® & HDBaseT® w/Deep Color, 3D [7], & 4K
Output Signal Types HDMI® w/Deep Color, 3D [7], & 4K (DVI compatible [2])
Maximum Scaler Input & Pass-Through Resolutions
Scan Type Resolution Frame Rate Color Sampling Color Depth
Progressive 4096x2160 4K DCI
&
3840x2160 Ultra HD 24 Hz 4:4:4 30 bit
30 Hz 4:4:4 24 bit
30 Hz 4:2:2 36 bit
60 Hz 4:2:0 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
Maximum Scaler Output Resolutions
Scan Type Resolution Frame Rate Color Sampling Color Depth
Progressive 4096x2160 4K DCI
&
3840x2160 Ultra HD 24 Hz 4:4:4 30 bit
30 Hz 4:4:4 24 bit
30 Hz 4:2:2 36 bit
60 Hz 4:2:0 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
Audio
Input Signal Types DM 8G+, HDBaseT
Output Signal Type HDMI, analog stereo [5]
Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
Analog Formats Stereo 2-Channel [5]
Digital-To-Analog Conversion 24-bit 48 kHz
Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted;
THD+N: <0.005% @ 1 kHz;
Stereo Separation: >90 dB
Analog Volume Adjustment -80 to 0 dB
Communications
Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
RS-232 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
IR/Serial 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud
DigitalMedia DM 8G+, HDCP 2.2, EDID, CEC, PoDM+, Ethernet
HDBaseT HDCP 2.2, EDID, CEC, Ethernet
HDMI HDCP 2.2, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI and/or HDBaseT device(s) and a control system
Connectors
COM (1) 5-pin 3.5 mm detachable terminal block, bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
IR 1 – 2 (1) 4-pin 3.5 mm detachable terminal block comprising (2) IR/Serial ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
AUDIO OUT L, R (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output [5];
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
RELAY 1 – 2 (1) 4-pin 3.5 mm detachable terminal block comprising (2) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
Ground (1) 6-32 screw, chassis ground lug
LAN (1) 8-pin RJ45 female, shielded;
10Base-T/100Base-TX Ethernet port
HDMI OUT (1) 19-pin Type A HDMI female;
HDMI digital video/audio output (DVI compatible [2])
DM IN (1) 8-pin RJ45 female, shielded;
DM 8G+ input, HDBaseT compliant;
PoDM+ PD (Powered Device) port[3];
Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1]
24VDC 1.25A MAX (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2412WU power pack included
Controls & Indicators
ACT (1) Green LED, indicates activity
SETUP (1) Red LED and (1) recessed pushbutton, for Ethernet setup
RESET (1) Recessed pushbutton, for hardware reset
LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
HDMI (1) Green LED, indicates video signal presence at the HDMI output
DM IN (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
24VDC (1) Green LED, indicates operating power supplied via PoDM+ or local power pack
Power Requirements
Power Pack 1.25 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2412WU included
Power over DM (PoDM) PoDM+ PD (Powered Device), capable of being powered by a PoDM+ PSE (Power Sourcing Equipment), conforms to IEEE 802.3at Type 2 Class 4 (25.5W)[9]
Power Consumption 18 Watts
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 63 BTU/hr
Enclosure
Chassis Metal, black finish, with (2) integral mounting flanges, vented top, front, and bottom
Mounting Freestanding, surface mount, or attach to a single rack rail
Dimensions
Height 12.51 in (318 mm)
Width 5.37 in (137 mm)
Depth 1.08 in (28 mm)
Weight
1.38 lb (625 g)