久久久久久久久国产在亚洲中文字幕人妻|91av福利china人妻91九色|国语精品视频自产自拍|色婷婷av一区二区三区久久|国产91丝袜在线|亚洲二区中文字幕|91久久精品中文内射|中文 欧美 日韩|午夜精品中文字幕|日韩av在线中文,日韩av午夜在线观看,久久精久,精久久久久久久久

Override Input

An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset state. States can be set and saved locally from the front panel, or remotely via software.

DIN Rail Installation

The DIN-8SW8 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-8SW8's front panel stays accessible while the connections are concealed.

Cresnet®

The DIN-8SW8 communicates with a DIN-AP2 2-Series Automation Processor, or other Crestron 2-Series control system, via the Cresnet control network. A pair of Cresnet ports is provided on the DIN-8SW8 allowing for easy daisy-chaining of several DIN Rail Series automation control modules.

 

  Switch Channels 8

  Maximum Per Channel 10 Amps incandescent, 5 Amps fluorescent, 0.5 HP @ 120 to 240 Volts AC, 50/60 Hz;

5 Amps @ 30 Volts DC;

16 Amps Resistive

  Module Total 80 Amps incandescent, 40 Amps fluorescent @ 120 to 240 Volts AC, 50/60 Hz

  Load Types* Incandescent, Magnetic Low-voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent, Motors

Connections

  1 – 8 (8) sets of (2) captive screw terminals;

Isolated Class 1 SPST relay switch circuits 1 – 8;

Relay Rating: 10 Amps incandescent, 5 Amps fluorescent, 16 Amps resistive, 0.5 HP @ 240 Volts AC (per channel);

Maximum Wire Size: 12 AWG (2.5 mm²)

  NET (2) 4-pin 3.5mm detachable terminal blocks, paralleled;

Cresnet slave port

  OVERRIDE (2) 2-pin 3.5mm detachable terminal blocks, paralleled;

Sensing input for external low-voltage contact closure;

Activates override mode when a closure is present;

Minimum Closure Rating: 10mA (per module) at 24 Volts

Controls & Indicators

  1 – 8 (8) Red LEDs and (8) miniature pushbuttons for status indication and local control of each channel

  NET ID (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID

  SETUP (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID

  OVR (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets

  PWR (1) Green LED, illuminates when DC power is applied to the NET port

  NET (1) Yellow LED, indicates communication with the control processor

  RESET (1) Recessed miniature pushbutton, resets internal processor

Enclosure

  Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm)

Power Requirements

  Cresnet Power Usage 5.4 Watts (0.23 Amps @ 24 Volts DC)

Environmental

  Temperature 32° to 104°F (0° to 40°C)

  Humidity 10% to 90% RH (non-condensing)

  Heat Dissipation 18 BTU/hr

Dimensions

  Height 3.71 in (9.42 cm)

  Width 6.26 in (15.90 cm)

  Depth 2.35 in (5.95 cm)

Weight

  13.1 oz (369 g)